View IC13T-68D-FEJR_1252516.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

FPC Connectors for CardBus PC Cards
IC13 Series PC Card Standard Compliant
sFeatures
1. Thinner Equipment Designs are Possible
(1) Connections are made to the main board via the FPC (*Note 1) which permits the PC card slot to be attached directly to the equipment case. The main board can be located at an arbitrary position in the thick direction of the PC card slot which permits thinner equipment designs compared to the on-board type. (2) Designed so that the screw (*Note 2) heads do not protrude from the main body when fastening to the equipment case.
*Note 1: In combination with multiple contact, 0.3 mm pitch FPC connectors of the 80-contact type (FH16 Series) *Note 2: When M2 screws are used
Designed so that screw heads do not protrude from main body
2. High Performance Ground
(1) Configured with 10 CardBus grounds for use with FPC patterns and FPC connectors. (2) The entire back surface of the FPC is configured with a ground mesh pattern.
Card in ejected condition
3. High Performance, Dual-End, 2-Point Push Card Ejection Mechanism
These connectors use a dual-end, 2-point push ejection mechanism that pushes the edge surface of the PC card horizontally. This ejection mechanism does not place a stressful load such as a rotational force on the PC card at the time of card ejection and thereby achieves a high level of reliability compared to the 1-point push ejection mechanism.
4. Long card ejection makes card removal easy
(See photograph to the right.)
sApplications
Notebook computers, PDA, etc.
A40
sProduct Specifications
Operation temperature Ratings Voltage rating Current rating -55c to +85c (Note 1) No. 1 to 68: 30 V AC No. 17, 18, 51, 52: 0.5 A, Others: 0.1 A Storage temperature Operation humidity -40c to +70c (Note 2) Relative humidity 95% or less (No condensation)
Item 1. Withstanding voltage 2. Insulation resistance 3. Contact resistance 4. Mating/un-mating forces 5. Mechanical operation
Specification No flashover or insulation breakdown. 500 M ohms min. 40 mo max. (Excluding conductor resistance) Mating: 39.2N max. Un-mating: 6.67N to 39.2N (1) Contact resistance:20 m ohms max.from initial value (2) No damage, cracks, or parts looseness. 90 V AC/1 minute 100 V DC 1 mA
Conditions
With corresponding connector 10000 cycles at 400 to 600 cycles per hour
Note 1:Includes temperature rise caused by current flow. Note 2:The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non- conducting condition of installed connectors in storage, shipment or during transportation.
sMaterials
Part Insulatior Card connection portion Contacts For ground clips Ground plate Eject metal fitting Metal fitting FPC Part Number IC13T-68D-FEJ* Material PBT Brass Stainless steel Phosphor bronze Stainless steel Stainless steel Polyamide base Weight 14.2g Finish Black Contact: Gold plating
----------
Remarks UL94V-0
----------------------------------------------
Contact: Gold plating
-------------------
Contact: Solder plating
UL94V-0
A41
sOrdering Information
IC13 T - 68 D - FEJ L
1 2 3 4 5 6
1 2 3 4
Series name: IC13 FPC type: T Number of contacts: 68 Contact surface of FPC contact portion D: Upper surface (FPC connector board lower surface mounting)
5 6
Eject button type FEJ: Foldering type Eject button position L: Left R: Right
sCorresponding FPC Connector
Part Number CL No. FH16-80S-0.3SHW 586-0613-7 Note: Please refer to the FH16 Series catalog for specification details.
sMounted Condition
Case
FPC
Main board
Case
FH16-80S-0.3SHW
Note : Please request a separate diagram for design purposes.
A42
sLeft Button Type
3.5 MAX
2 2
60.9 59 6
1.5 MAX Fitting movement rang 27 13 MAX
9.7 MAX 10 MAX
6.7 MAX
12 MAX
94.6 (At time of card ejection)
85.6 (Card insertion condition)
5.9
17.3 8 2 58 6.5 5 34.125 41.625 2.5 0.5 3.1 No.1 No.34 No.35 No.68
4.8
5.6
Note 1: Dimensions of the card mating portion conform to the PC Card Standard. 2 The indicated dimensions (at the three locations) are symmetrical about the center of the card insertion slot.
Part Number IC13T-68D-FEJL
2.9
10.5(After card ejection)
9(Stroke)
CL No. 640-1201-6
40
72
A43
sRight Button Type
2 2
60.9 59 6
3.5 MAX
1.5 MAX Fitting movement rang 27 17.3 5.9 6.7 MAX 10 MAX 9.7 MAX 12 MAX 85.6 (Card insertion condition) 2 58 8 10.5(After card ejection) 9(Stroke) 13 MAX 94.6 (At time of card ejection) 72 40 6.5
5 34.125 41.625 No.34
4.8
2.5
No.1
3.1
0.5
No.35
No.68
Note 1: Dimensions of the card mating portion conform to the PC Card Standard. 2 The indicated dimensions (at the three locations) are symmetrical about the center of the card insertion slot.
Part Number IC13T-68D-FEJR
CL No. 640-1202-9
A44
2.9
5.6
BPCB mounting pattern
FPC side
Left Button Type
Fixed (screw fastended)portion:4-O5.5MAX 60.05 580.05
0 Positioning boss:4-O2 -0.1
4.80.05
(40)
10 min
A
A *Note FG indented area 3.5 min PC card insertion direction
400.05
B
B
A-A 4MAX 4MAX
B-B
(40) Case Tap:M2 FPC side Fixed (screw fastended)portion:4-O5.5MAX 580.05 60.05 400.05 (40) B *Note FG indented area PC card insertion direction B 3.5 min B-B 4MAX Case Tap:M2 2.6 10 min 2.6
2.6
Case
Tap:M2
*Note : The FG can also be dropped via the fitting of the fixed (screw fastened) portion.
Right Button Type
0 Positioning boss:4-O2 -0.1
4.50.05
(40) A
A
A-A
2.6
4MAX
Case Tap:M2
*Note : The FG can also be dropped via the fitting of the fixed (screw fastened) portion.
A45
BFPC Connector Land No.
P79
P3
P1
P80 Mark side
P78
P2
FPC insertion direction
Note: See the FH16-80S-0.3SHW catalog for the land dimensions.
BConnection Table
CN2 CN1 CN33 CN34
CN35 CN36
CN68 CN67
P 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
CN 1(GND) 35(GND) 2 36 3 37 4 38 5 39 6 GND 40 7 41 8 42 9 43 GND
P 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40
CN 10 44 11 45 12 46 13 GND 47 14 48 15 49 16 50 17 51
P 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
CN 18 52 19 53 20 54 21 55 22 GND 56 23 57 24 58 25 59
P 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80
CN GND 26 60 27 61 28 62 29 GND 63 30 64 31 65 32 66 33 67 34(GND) 68(GND)
A46
BMethod of Mounting to the Equipment
1. Insert the IC13 FPC portion to the FH16 connector (i.e., FPC connector) on an upward angle. 3. Fasten the PC card slot to the case with screws. (M2 screws are recommended.) Be careful that a load is not placed upon the FPC and FH16 at this time.
M2 IC13
FH16
2. Fasten the lock of the FH16 connector (i.e., FPC connector) and connect the FPC portion.
4. Completion
FPC side
0 Positioning boss:4-O2 -0.
Fixed (screw fastended)portion:4-O5.5MAX 60.05 580.05
4.80.
Note: See the FH16 Series catalog for details about the FPC insertion and removal methods.
When handling, please hold the portion indicated by the arrow marks with the button pulled out as illustrated in the diagram below. If the portion connected to the ejection fitting is held with the button pushed in, the fitting might come loose.
Portion connected to the ejection fitting
Button pulled out
Button pushed in
A47

▲Up To Search▲

Price & Availability of IC13T-68D-FEJR

	To Download IC13T-68D-FEJR Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .